3.50mm & 3.81mm Screw Terminal Block Rising clamp :RHTBY25H-3.50&3.81

Series P/N: RHTBY25H-3.50&3.81

PCB Terminal Block Rising clamp is available at RHT.

We have been selling on the markets many years and get good feedback.

Please view our large selection of PCB Terminal Block Rising clamp. Any questions,Please contact our sales team to get any service support.

If you need any samples,quick L/T, and etc, we will try our best to support.

2D(PDF)Drawing

3D(IGS / STP)Drawing

Product parameter:

Features

-Pitch Size: Refers to the center-to-center spacing between adjacent terminals. The 3.50mm and 3.81mm pitches are standard measurements that accommodate various wire sizes and are common in electronic PCB designs.

-Connector Type: Utilizes screw terminals with rising clamp mechanisms for wire termination. The rising clamp design allows wires to be securely fastened by tightening screws, ensuring a reliable electrical connection.

-Material: Typically made from materials such as brass, copper, or tin-plated copper for good electrical conductivity and corrosion resistance. The housing material is usually a durable thermoplastic or thermoset material that provides insulation and mechanical support.

-Current Rating: Specifies the maximum current carrying capacity (in amps) that the terminal block can safely handle, ensuring safe operation under specified electrical conditions.

Applications

Electrical :

Rated voltage:300V

Rated current:15A

Contact resistance: 20mΩ

Insulation resistance: 500MΩ/DC500V

Withstanding Voltage: AC1600V/1Min

Wire range:28-16AWG1mm²

Material :

Screws: M2.5steel Zinc plated

Pin header: Brass, Sn plated

Housing: PA66, UL94V-0